BOSCH

Superior drilling rate in the 2 kg hammer class Rotation stop for chiseling Impact stop for drilling in wood and steel Technical data Rated input power* : 800 Impact...

The handy tool for blowing and dust extraction   Strongest air flow for better work efficiency Highest air flow volume Powerful motor   Variable speed dial wheel...

With 1400 watts, it has the highest motor power in its class for fast sawing progress in soft and hard wood Highest cutting depth (70 mm) and bevel capability (56°) in its class for...

Good abrasive performance for grinding and routing work, versatile application for brushes, flap discs and sanding belt heads With electronic control for gentle acceleration and Constant...

Technical data Rated input power* : 2,050 W Saw blade diameter* : 235 mm Saw blade bore diameter : 25.4 mm No-load speed : 5,300 rpm Weight : 7.6 kg Base plate :...

4 main applications can be stored permanently, so that airflow and temperature are at the correct setting instantly Airflow and temperature control in steps of ten for precise working;...

Easy switch between impact and drilling mode Forward/reverse rotation for screwdriving applications Powerful 550 watt motor with 13mm keyed chuck, aux handle and depth stop...

One button operation - press button once to begin measuring in continuous mode, press same button again to hold measurement Continuous measurement mode - starts measuring as soon as it's...

The A-rated noise level of the power tool is typically as follows: Sound pressure level 93 dB(A); Sound power level 104 dB(A). Uncertainty K= 2 dB. Wide range of applications in chiselling...

Technical data Rated input power* : 1,100W. Impact energy* : 8.5J. Impact rate at rated speed : 1,500 – 2,900bpm. Rated speed : 170 – 340 rpm. Weight : 6.8kg...

These large steel drill bits should be used at much slower speeds than smaller bits. If using on metals always use a cutting paste or spray to provide cooling and lubrication...

13 screwdriver bits for 3 different screw types, as well as 3 standard nutsetters for use with key-headed screws. Magnetic universal holder for fast bit changes and a reliable screw hold in...

Rated input power : 1,400W. Capacity Abrasive disc : 180mm (7”). Power output : 800W. No load speed 0-3,00rpm. Rubber sanding plate : 180mm. Wire cup brush : 100mm...

The Bosch Cordless Leaf Blower Alb 18 Li is a powerful and lightweight tool that makes short work of leaves and debris. It has a long-lasting 18V battery, so you can keep working without worrying...

Rated input power : 2,000 No-load speed : 8.500 rpm Disc diameter : 180 Grinding spindle thread : M14 Main handle : Barrel Powerful 2000 watt motor Light and...

Additional data Rated input power 450 W Stroke rate at no load 800 – 3,100 spm Saw, stroke length 18 mm       Cutting...

Rated input power : 1,600W Working temperature : 300 – 500°C Airflow : 240 – 450l/min Control, airflow : 2

Rated input power : 1,200W No-load speed : 1,000 rpm Tool dimensions (width) :375mm Tool dimensions (length): 312mm Tool dimensions (height) : 195mm Max. torque : 12...

Additional data Rated input power 570 W Weight 1.7 kg No-load speed, 1st gear 0 – 3,000 rpm Power output 300 W Rated torque 1...

Professional Batteries for the Bosch range of cordless tools. This new generation of batteries offers a 30% increase in energy over standard batteries. Low cost. BOOST mode to save...

For clean cut edges in ceramic tiles The low-cost solution for all-round use in tiles Sintered cutting rim

No Load Speed: 0-2800 rpm Impact rate at, no load speed 44800 bpm Drilling Diameter Concrete: 13 mm Drilling Diameter Wood: 25 mm; Chuck Capacity: 1.5-13 mm Item Weight: 1.7 Kg

Red 150mm 120G 6 hole Velcro backed Long life Ideal for use on various wood surfaces eg. wooden tables and staircases Suitable for Bosch, Dewalt, Hilti, Hitachi, Metabo and other orbital...

For pre-sanding, e.g. of rough, uneven beams and boards For surface sanding and sanding down of surface blemishes For finishing and fine sanding of wood Appropriate for Bosch GOP...

Suitable for masonry, concrete and reinforced concrete;Appropriate for all rotary hammers with SDS-plus holder. It is Designed to drill smooth, clean cuts in wood. Brad Point Tip that...

Diamond cutting disc Use for cutting tiles 115 mm diameter Comes in a printed cardboard wrap

DeWALT HCS jigsaw blades are engineered to deliver a quality cut in a variety of materials; including wood; laminates and plastics. Made from high carbon steel. For use in soft...