Adhesive

Thorough cleaning Fast evaporation At the same time makes surfaces free of grease and oil Applying a new seal is immediately possible Pore-deep cleaning

Standard epoxy adhesive. 180g boxes (resin 100g + hardener 80g) Each box contains 1 x 100g tube of resin and 1 x 80g tube of hardener This is the world's strongest adhesive. Each pack contains two tubes: resin and hardener. ...

Araldite 5 minute Rapid Epoxy adhesive Glue Araldite is a fast setting, very strong adhesive, which will bond ceramics, wood, chipboard, glass, metal and most hard plastics. Solvent free, heat and cold, water and oil resistant. Each...

Pattex Premium Contact Adhesive is a polychloroprene contact adhesive recommended for bonding a wide variety of materials e.g. wood, aluminium, laminates, leather (shoe, bags, etc.) rubber, cork, felt, foams, PVC, etc. to absorbent and...

Bonds plastic panel boards (such as Formica®), veneer, hardboard, plastic edges, rubber, leather, linoleum, cork, textiles or polyether foam to itself as well as to wood, chipboard, concrete and metal. Excellent for bonding stair edgings,...

Seals gaps up to 25mm under a door Suitable for internal or external doors Pre-drilled for easy assembly Can be cut to size Screws included

High strength, high viscosity room temperature curing adhesive works hard to get the job done. Used to join fitted cylindrical parts. Allows relaxed machining tolerances, and replaces clamp Rings, set screws, and snap Rings...

Pack Size: 50 Ml. Threadlocker. Oil resistant. General purpose.  Threadlocking Adhesive - medium strength. Suitable for all metal threaded assemblies. LOCTITE 243 is a general purpose threadlocker of medium bond...

Strength High. Compatible Materials Metal. Features Close fitting / press fit. Product Composition Viscous liquid. Diametrical clearance: Up to 0.1 mm. Tensile shear strength: >15 N/mm². Service temperature...

Rapid hardening Resistant to many substances Very high strength even on slightly oily bonded parts Low viscosity with excellent capillary action Medium and high viscosity for bearings and bushings density (25°C) g/cm3...